Branch ho, SAN type connector [price], SAN type connector is provided by Section ho. We are Shenzhen Branch Hao Electronic Technology Co. (www.kehold.com) located in: Shenzhen, Guangdong professional: the difference between AV interface and terminal line interface physiotherapy wire, cable, electronic wire, carbon wire, halogen-free line of thought To know where the terminal line sales SAN type connector factory, also called on the AV interface (RCARCA), but also TV's improved interface, terminal line and the appearance is very different, mainly divided into three lines, the main is the audio interface (red and white lines, consisting of left and right channels) and video interface (yellow). TV interface is the RF input, this is no doubt, this is the interface first appeared in the TV above, TV imaging principle of the interface is the video signal output (CVBS) and audio (Audio) mixed coding, and then display devices within range of the separation / decoding process output imaging. Because the steps are relatively cumbersome SAN type connector price, so for video, audio and video mixing encoding, can cause interference signal, so the quality will become all the interfaces among the worst. Routine maintenance considerations Terminal blocks Terminal blocks general installation environment requirements: minimum ambient temperature -5 ℃, the maximum ambient temperature 40 ℃. Numerous studies show that SAN type connector manufacturers, terminal block failure rate with increasing temperature from rising index of life with increasing temperature dropped from the index, the environmental temperature 10 ℃, terminal blocks use life will be halved. In addition, the operation of terminal blocks are good, and the cleanliness of the environment have a great relationship. Winter is the multiple failures of terminal blocks, and only through good maintenance work to be able to reduce the generation of equipment failure, the user must pay attention to. In the winter maintenance of high-voltage terminal blocks, terminal installation should pay attention to the temperature of the environment, periodically clean the dust inside the terminal blocks, ensure that the cooling air duct patency. Strengthen inspection, improve terminals, motor and line surroundings.